Frame profile, aluminum, silver, 200 cm

Can only be ordered in conjunction with our shower and wall elements

Connection profile, aluminum, silver, 200 cm for connecting shower and wall elements

Can only be ordered in conjunction with our shower and wall elements

Angle profile, 10/13 mm, aluminum, silver, 200 cm for connecting shower and wall elements

Can only be ordered in conjunction with our shower and wall elements

Angle profile, 7/21 mm, aluminum, silver, 200 cm for connecting shower and wall elements

Can only be ordered in conjunction with our shower and wall elements

We recommend especially for our shower and wall elements:

flexible liquid sealing film (one-component) for seamless and joint-free sealing under tile and slab coverings for damp and wet room areas indoors. Suitable for wall and floor surfaces in bathrooms, shower areas and other moisture-prone rooms.

• ready to use
• short drying time
• crack bridging
• can be rolled, brushed and troweled
• highly elastic (elongation at break approx. 310%)
• Processing temperature: + 5 ° C to + 30 ° C
• Verifiability: after complete drying (approx. 24 hours)
• Consumption: approx. 1.2 kg / m²

1 bucket, 8 kg

In connection with the liquid sealing film for indoor use, you need this extruded polyethylene sealing membrane between a polypropylene fleece to bridge movement joints and flexible, watertight formation of edge and connection joints in the wall and floor area, as well as for sealing pipe penetrations in wet areas .

• Transversely elastic, longitudinally rigid and water-repellent elastomer
• impermeable to water as well as weather and alkali resistant
• for permanent underwater areas
• highly tear-resistant and stretchable
• suitable for inside and outside
• high adhesive bond for surface sealing
• Temperature resistance: - 30 ° C to + 90 ° C
• Pressure water resistance:> 1.5 bar

The sealing tape should be installed centrally in the corner joints and over material transitions.

Scope of delivery: 1 roll, 12 cm wide, 50 meters